Disc collection shelf-space calculator

Count your cases, measure a shelf, and see how much room your movies need.

Your collection

Count cases, not the discs inside. Example counts are filled in.

Your shelving
Case thickness and extra packages

Keep extra packages out of the three counts above. Every thickness is editable in mm. The 40 mm box-set value is an example: measure your boxes.

PackageCountmm each Blu-ray 200 4K UHD 50 DVD 100 SteelBooks Slim cases Filled sleeves Box sets / other

Starting thicknesses: published case examples and sleeve estimate.

Entries stay in this browser when saving is available.

Measure the space your cases use

Measure each shelf from the inside of one support to the other. A furniture listing's outside width can include thick side panels. Use the clear width left after bookends or dividers.

Stand cases upright, spines facing out, in one row. Spine thickness uses up the shelf's length. Case height sets the gap above each shelf; the front-to-back case size sets the depth you need.

For a better thickness estimate, line up ten of your cases, measure their total width, then divide by ten. Include any slipcovers you plan to keep. The example collection and 30-inch shelf are starting values you can replace.

Case thickness: the starting values

Packaging varies by maker, release and country. These are specific published examples, not one size that every disc format must use. Open “Case thickness and extra packages” above to change any value.

Blu-ray keep case: 12 mm (0.47 in)
Vinpower's packaging specifications list a 12 mm standard single Blu-ray case.
4K UHD keep case: 14 mm (0.55 in)
CheckOutStore's black 4K case is 14 mm. A 4K disc may come in other packaging; measure yours.
DVD keep case: 14 mm (0.55 in); slim case: 7 mm (0.28 in)
CDROM2GO's case dimensions give both sizes. Vinpower lists the same DVD thicknesses. The slim preset uses this DVD example, including when you try it for other formats.
SteelBook: 15 mm (0.59 in)
Scanavo's SteelBook specifications (PDF, page 17) list 15 mm for its standard Blu-ray case. Use your own measurement for a different metal case or a protective cover.
Filled sleeve: 3 mm (0.12 in), an editable allowance
This is a planning estimate for a disc plus sleeve, not a maker's specification. Measure a stack of your filled sleeves: inserts, seams and storage boxes change the space they use.

How the shelf estimate works

The total run adds up each package's thickness. Inches and centimetres show the same length; there are 25.4 millimetres in an inch. The free-space setting reserves that share of every shelf before cases are placed.

The planner starts with the thickest packages, fills a shelf with whole cases, then uses smaller cases in the gaps. It repeats until all cases have a place. This is a practical packing estimate, not a promise of the fewest possible shelves. It may mix formats on a row.

A “shelf” here means one usable row, not a whole piece of furniture. The bookcase count rounds the shelf count up to your chosen number of rows per bookcase. It assumes all rows have the same clear width and can hold your cases upright.

The default 10% free space is a choice for getting cases in and out, not a sourced storage rule. It is separate from future purchases. Add planned new cases to the counts if you want to allow for growth.

Shelf-planning questions

Should I count discs, films or cases?

Count the packages that stand on the shelf. A two-disc film in one case counts once. For loose discs in sleeves, count filled sleeves. Put SteelBooks and slim cases in their own rows and leave them out of the format counts.

How many DVDs fit on a 30-inch shelf?

With 14 mm DVD cases, a clear 30-inch shelf fits 54 cases when packed tight. Leaving 10% of the width free reduces that to 48. These figures use the inside shelf width, without dividers.

Can I use this for box sets and slipcovers?

Yes. Use the extra row for box sets and enter their measured average thickness. Include slipcovers and protective covers when measuring. If sets vary a lot, measure the whole group and divide by the number of boxes.

Will the bookcase count guarantee a fit?

It estimates horizontal space in equal-width shelf rows. Check shelf depth, height, load rating and the maker's fixing instructions separately. Cases may need rearranging to use the last bit of space; keeping strict title order can need extra rows.